Изберете предпочитаната от вас страна от долния списък,
за да намерите най-близкия дистрибутор или партньор.
марки
| Up to 50% less energy consumption in application versus 18 and 26W PL-C/T on electromagnetic ballasts for comparable lighting levels |
| Up to 25% less energy consumption in application versus 18 and 26W PL-C/T on electronic drivers for comparable lighting levels |
| Easy lamp (re-)placement and stable fixation due to new twist and lock lampbase / holder |
| Longer lifetime and less early failures lead to less hassle and lower maintenance costs and facilitate the change from spot to group replacement |
| Dimming possible down to 10 % |
|
Twist and lock 4-pin lamp base GR14q-1 without starter and capacitor
|
|
Maximum light output reached at approximately 35-40 °C in free-burning base-up position
|
|
Fluorescent tri-phosphor technology
|
|
Extra long lifetime and less early failures
|
|
Very low light depreciation over lamp life
|
|
Service lifetime of 19000 hours
|
|
Designed for general down-lighting in (semi-)professional indoor applications: offices, retail, hospitals, governmental and public buildings
|
|
Ideal for use in recessed or surface mounted downlighters, wall units
|
|
Suitable for use in applications where maintenance costs are high (high ceilings, difficult to reach):department stores, supermarkets, warehouses, production halls and public areas
|
|
Lamp light technical and electrical characteristics are influenced by operating conditions, i.e. lamp ambient temperature and operating position as well as applied HF control gear
|
|
Shorter lamp life when often switching and not well pre-heated electrodes
|
|
A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
|
