марки

4MX091 TL-D electrical units

Maxos, TL-D electrical units

Maxos, TL-D electrical units

      Product family information

      The electrical units for Maxos TL-D trunking sections are designed for quick and reliable click-in mounting. They are made of steel, with a white or silver coating. For electrical connection to the trunking a connector block is mounted. The electrical units are equipped with electronic ballasts (possibly dimming ballasts) or low-loss conventional ballasts. The conventional ballasts are available parallel compensated (IC) or inductive (I). The units can hold 1 or 2 TL-D lamps.Dimmable versions are delivered with the HF-R electronic ballast, allowing the light output of the TL-D lamps to be regulated from 3 to 100%. HF-R units must be mounted to trunking sections with 7-wire cable.Emergency LightingSpecial electrical units equipped with an emergency battery pack of 1 or 3 hours (EL1/EL3) are available. These units must be used with 7-wire trunking sections. If trunkings with double wiring are used, one flat ribbon cable will be connected to the central battery. This provides a completely separate emergency lighting circuit. Only than standard electrical units equipped with electronic ballasts can be used for emergency lighting.The electrical units can be combined with a complete range of reflectors. Some 2-lamp version reflectors need special electrical units (F32) with a close distance between the lamps. On request, the electrical units can be upgraded from IP 20 to IP 40 with special protection rings that are clicked on to the lampholder.

      Benefits

      Electrical units for Maxos trunking sections can hold 1 or 2 TL5 or TL-D lamps and are designed for quick and reliable click-in mounting
      Can be equipped with HFP electronic ballasts, HFR dimming ballasts, HF-DALI ballasts or low-loss conventional ballasts for all current and future applications
      Special electrical units with emergency battery pack for 1 or 3 hours of operation are available

      Features

      Special electrical units available with emergency battery pack for 1 or 3 hours operation
      Wide choice of ballasts for all current and future applications: HFP electronic ballasts, HFR dimming ballasts, HF-DALI ballasts
      Easy click-in mounting
      Upgradable from IP20 to IP40

      Applications

      Industry
      Shops
      Schools
      Downloads
      Leaflets
      Visuals
      Software Plugins
      Product family details
      General
      Type
      • 4MX091
      Light source
      • Fluorescent:
      • 1 x or 2 x MASTER TL-D / G13 / 36, 58 W
      Gear
      • Electro magnetic (low loss), 230 or 240 V / 50 Hz:
      • Inductive, parallel compensated (IC)
      • Electronic, 220 - 240 V / 50 - 60 Hz:
      • High Frequency Performer (HFP)
      • High Frequency Regulator (HFR)
      • High Frequency Basic (HF-Dali)
      Option
      • Emergency lighting:
      • 1 hour (EL1), 3 hours (EL3)
      • 2-lamp lampholder of 32 mm (F32) to be used in facetted and aluminum reflectors, standard is 115 mm
      • Master/slave unit: pair of electrical units one with gear (M) one without gear (S)
      Material
      • Sheet steel in white (WH) or silver (SI)
      Installation
      • Click-in fixation (mechanical and electrical) on trunking
      Remarks
      • Dedicated IP40 sets for upgrading from IP20 to IP40
      • Отметнете продукт, за да го добавите
         
      • Отметнете продукт, за да го добавите
         
      • Отметнете продукт, за да го добавите
         
      Отметнете продукт, за да го добавите

      Създаваме нови предимства  заедно


      Намерете най-близкия дистрибутор или партньор
       

      Изберете предпочитаната от вас страна от долния списък,
      за да намерите най-близкия дистрибутор или партньор.

       

      Търсене на дистрибутор или партньор

      Карта на света