View all 37 products

Standard trunking sections 4MX656 MAXOS TL5

Maxos TL5 standard trunking

Maxos TL5 standard trunking

  • Name

    Product family information

    The trunking fulfils two functions: first it provides a sturdy in-line mounting rail on which to fix the electrical units, and second, it provides a housing for the electrical cables that bring power to the units. All the trunking sections are made of hot-dip galvanised steel, with a white or silver coating. They are available in dedicated TL5 lengths of 1, 2 and 3 electrical units 49 W (35/80 W) and 54 W (28 W).A flat ribbon cable (5 or 7 wires) or two flat ribbon cables (2x5 or 2x7 wires) are integrated in the trunking and guarantee (in combination with an integrated phase selection switch and contact blocks) a safe and correct cabling. The 7-wire cable is used to integrate light regulation or emergency lighting for those electrical units equipped with emergency battery packs. Double wiring (2x5 or 2x7 wires) is needed to provide a completely separate mains supply to the electrical units. Double wiring is mostly used for emergency lighting by central emergency batteries or separate switching.Hence, no extra contact blocks or wiring needs to be installed.For suspended light-lines the trunking sections are connected using the integrated electrical connector and a sturdy external mechanical coupling piece (accessory). Surface mounted lightlines use the same integrated electrical connector and an internal coupler (accessory). On the upper part of the trunking section special knockout openings enable cable entry wherever needed.The trunking is available with a complete range of interchangeable components that optimise flexibility. The outstanding stability of the sections and coupling pieces, allows suspension intervals between 3.4 m up to 5 m (see chart).The basic accessories of MAXOS TL-D trunkings can also be used for the TL5 trunkings.

    Benefits

    Provides a sturdy mounting rail for the electrical units and a housing for the electrical power cables
    Integrated flat ribbon cables, phase selection switch and contact blocks guarantee safe and correct cabling
    Available with a complete range of interchangeable components to optimize flexibility

    Features

    Easy to install
    Integrated flat-ribbon cables, phase-selection switch and contact blocks guarantee safe and correct cabling. Wide choice of flat-ribbon cables: 1 x or 2 x 5 x 1.5 or 2.5 mm 1 x or 2 x 7 x 1.5 or 2.5 mm
    Sturdy construction allows distances between suspension points of 3.4 to 5 m.
    The trunking is available with a complete range of interchangeable components that optimize flexibility.
    Possibility to integrate two NYM cables

    Applications

    Industry
    Shops
    Schools
    Downloads
    Leaflets
    Visuals
    Product family details
    General
    Type
    • 4MX656
    Length
    • 1 x, 2 x or 3 x length of electrical unit 49 W (491, 492 or 493), for 80 and 35 W electrical units as well
    • 1 x, 2 x or 3 x length of electrical unit 54 W (541, 542 or 543)
    Electrical circuit option
    • 1 x or 2 x flat ribbon cable, 5 or 7 wires:
    • 1 x or 2 x 5 x 1.5 or 2.5 mm2
    • 1 x or 2 x 7 x 1.5 or 2.5 mm2
    Material
    • Hot-dip galvanized steel in white (WH) or silver (SI)
    Accessory
    • Trunking end piece, mains connection, trunking coupling pieces, etc. (see chapter Maxos accessories)
    Remarks
    • 7-wire cable for integration of light regulation or emergency lighting
    • Double wiring for emergency lighting by central emergency batteries or separate switching
    • Отметнете продукт, за да го добавите
       
    • Отметнете продукт, за да го добавите
       
    • Отметнете продукт, за да го добавите
       
    Отметнете продукт, за да го добавите

    Създаваме нови предимства  заедно


    Намерете най-близкия дистрибутор или партньор
     

    Изберете предпочитаната от вас страна от долния списък,
    за да намерите най-близкия дистрибутор или партньор.

     

    Търсене на дистрибутор или партньор

    Карта на света