TMX400 Electrical units

TTX400 TL-D, TMX400 electrical units

TTX400 TL-D, TMX400 electrical units

Product family information

These electrical units are designed for quick click mounting in TTX400/410 trunking sections. They are for use with one or two TL-D lamps, with conventional or electronic (dimming) ballast, in emergency lighting version and in versions for the mounting of projectors. They contain all the necessary electrical and mechanical functions. All components are screwed onto the electrical unit. The units can be combined with any type of reflector, and are made of white sheet steel. These electrical units are also available for TL5 lamps.Electronic ballastsTMX400 are delivered standard with electronic ballast HFP, or the more simple HFB ballast for applications where there is a limited number of on/off switching. The dimmable version of the TMX400 is delivered with the electronic ballast HFR, allowing the light output of the TL-D lamps to be regulated from 3 to 100 %. This unit is ideal for (day)light-dependent control, and must be mounted to the prewired TTX400 section with 7-wire ribbon cable. The TMX400 units with conventional ballasts, are supplied with an electrical connector, starters, any necessary capacitor, and lampholders.Emergency lightingTMX400 are also deliverable in versions with in-built 1- and 3-hour emergency lighting equipment. These units are mounted in the same way as all the other TMX400 electrical units and must be used with the prewired TTX400 trunking section with 7-wire ribbon cable.IP 40All electrical units TMX400 can be upgraded from IP 20 to IP 40 with special protection rings (ZTX400 IP 40), which can be clicked on the lampholder. IP 40 with protection tube is also possible with the use of special lampholders. Protection tubes are available and are delivered with these special lampholders (PT-set).


Cost-effective light-line solution for use in industrial and retail environments
Increases productivity and enhances the shopping experience by ensuring perfect light distribution in a wide range of design configurations
Easy installation with only 5 clicks; offers a wide choice of mounting options and decorative accessories


Quick, simple and safe electrical connection
The units can be combined with any type of reflector
Built in 3-hour or 1-hour emergency lighting equipment


See all products
Software Plugins
Product family details
  • TMX400
Light source
  • Fluorescent:
  • 1 x or 2 x MASTER TL-D / G13 / 36, 58 W
  • Electro magnetic (low loss), 230 V / 50 Hz:
  • Inductive (I)
  • Inductive with possible mounting of capacitor in parallel (IKP)
  • Inductive, parallel compensated (IC)
  • Electronic, 220 - 240 V / 50 - 60 Hz:
  • High Frequency Performer (HFP)
  • High Frequency Regulator (HFR)
  • High Frequency Regulator, DALI and Touch (HFR-TD)
  • Emergency lighting:
  • 1 hour (EL1), 3 hours (EL3)
  • Master/Slave:
  • 1 master + 1 slave (M/S)
  • both master and slave (M-S)
  • 2-lamps lampholder with small width (F32)
  • HFR/HFR-TD with emergency lighting: TMX400 9 for trunking 9 wires or preferably TMX400 C-2R to be used with TTX400 7-wires (thereby in case of non-continuous lightline, to order throughwiring / ZTX400 C1300-2 or C1600-2 as accessory)
  • Sheet steel, white
  • Click-in fixation (both mechanical and electrical connection) on trunking TTX400 with 5- or 7-wire ribbon cable
  • Blind covers
  • Throughwiring set to be used in combination with TMX400 C-2R onto TTX400, in the case of non-continuous lightline (ZTX400 C1300-2 for 1 section 36W; ZTX400 C1600-2 for 1 section 58W)
  • Отметнете продукт, за да го добавите
  • Отметнете продукт, за да го добавите
  • Отметнете продукт, за да го добавите
Отметнете продукт, за да го добавите

Създаваме нови предимства  заедно

Намерете най-близкия дистрибутор или партньор

Изберете предпочитаната от вас страна от долния списък,
за да намерите най-близкия дистрибутор или партньор.


Търсене на дистрибутор или партньор

Карта на света