Изберете предпочитаната от вас страна от долния списък,
за да намерите най-близкия дистрибутор или партньор.
Programmed start: flicker-free ignition in 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life |
Smart power ensures constant light, independent of mains fluctuations, and dimming from 3 to 100% |
Protected against excessive mains voltages, incorrect connections and incorrect lamp use |
Extremely low stand-by losses, controlled cut-off for dimming levels above 80%
|
Combined with controls, additional energy savings can be achieved
|
Stop circuit is activated within 5 seconds of lamp failure (safety stop), and ballast resets automatically after lamp replacement
|
HF operation improves light quality and lamp lifetime
|
Programmable Corridor Mode
|
Compliant with European and Asian norms and suitable for emergency lighting systems
|
Indoor general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)
|