В момента разглеждате уебсайта на Philips lighting. На Ваше разположение има и локализирана версия.
Предложения
    Close filters Show filters
    Показване на повече филтри
    Показване на по-малко филтри
    • Продукт
    • Wattage
    • Lamp Luminous Flux
    • CCT (K)
    • IES
    • Изтегли листовката

    Сортиране по:

        Product family information

        Range of premium quality electronic starters for igniting fluorescent lamps operating on conventional electromagnetic ballast.

        Benefits

        S2E - S10E
        Lower cost of lighting ownership: - Lamps last much longer thanks to a totally smooth, flicker-free and fast starting. / - Electronic starters turn off lamps at end of life, which avoids irritation (no flickering), useless electricity consumption and fire risk. / -Longer starter service life compared to conventional starters
        Contribution to a green environment (no lead and no radioactivity)
        Flame-retardant components & UV resistant canister lead to additional safety and a secure ignition
        Easy recognition & installation and replacement friendly
        SiS10
        Lower cost of lighting ownership: - SiS 10 starter turns off lamps at end of life, which avoids irritation (no flickering), useless electricity consumption and fire risk. / - 4 times longer service life compared to conventional starters
        System is immediately ready for use again by simply pressing the red button following an interruption
        Contribution to a green environment (no lead and no radioactivity)
        Flame-retardant components & UV resistant canister lead to additional safety and a secure ignition

        Features

        S2E - S10E
        Instant flicker-free ignition (nom. 2.3 sec)
        Full thermal safety monitor which cuts off defective or end-of-life lamps
        Cut-off circuit to protect the starter and overheating of the control gear
        Premium reliability with 100.000 safe switches
        Radioactive-free (patented) and lead-free (RoHS-compliant)
        2-pin igniter in plastic (flame-retardant polycarbonate) canister
        Narrowed top & installation notch
        SiS10
        Reliable automatic disconnection of defective or end-of-life fluorescent lamps
        Cut-off circuit to protect the starter and overheating of the control gear
        Button with 3x restart function
        Premium reliability with 10.000 safe switches
        Radioactive-free (patented) and lead-free (RoHS-compliant)
        2-pin igniter in plastic (flame-retardant polycarbonate) canister with radio-interference suppression capacitor

        Applications

        Starters are used in conventional electromagnetic fluorescent lamp systems using TL-D (T8), TL (T12), TL mini, PL-S and PL-L lamps.
        S2-E starters are suitable for:
        110/130V, 18-22W single applications
        220/240V, 18-22W series applications
        S10-E starters are suitable for:
        220/240V, 18-75W single applications
        SiS 10 starters are suitable for:
        220/240V, 30-65W single applications
        As for the SiS 10 starter, always press the red button after replacing a lamp so that the system is operational again.
        Downloads
        Leaflets
        Visuals
        • Отметнете продукт, за да го добавите
           
        • Отметнете продукт, за да го добавите
           
        • Отметнете продукт, за да го добавите
           
        Отметнете продукт, за да го добавите

        Създаваме нови предимства  заедно


        Намерете най-близкия дистрибутор или партньор
         

        Изберете предпочитаната от вас страна от долния списък,
        за да намерите най-близкия дистрибутор или партньор.

         

        Търсене на дистрибутор или партньор

        Карта на света