В момента разглеждате уебсайта на Philips lighting. На Ваше разположение има и локализирана версия.
    Close filters Show filters
    Показване на повече филтри
    Показване на по-малко филтри
    • Продукт
    • Wattage
    • Luminous flux (lm)
    • CCT (K)
    • IES
    • Изтегли листовката

    Сортиране по:

        Product family information

        Low-pressure high-output mercury discharge lamps with a tubular 16 mm envelope


        Compact lamp with high lumen package
        Longer lifetime and fewer early failures mean lower maintenance costs and facilitate change from spot to group replacement
        Less waste and disposal cost at end-of-life
        Allow system miniaturization with maximum luminaire design freedom
        Optimized for installations which need high luminous flux
        Excellent lumen maintenance
        Good color rendering


        Significant reduction of early failures through advanced long life technology
        Extra long lifetime and high reliability
        Designed for high lumen output and system miniaturization (40% thinner than TL-D lamps)
        Highly efficient 3-band fluorescent coating in combination with precoating
        Specifically designed for operation with electronic gear
        Maximum lumen output reached at approx. 35 °C in free-burning position
        Can be ignited from -15 ° to +50 °C
        Low mercury dose
        End-cap has an x-shaped green bottom plate to distinguish the lamp from other fluorescent lamps


        Can be used with TL5 electronic gear
        Longest lifetime is achieved with Philips HF Xtreme gear


        Where maintenance costs are high, e.g. high ceilings or other hard-to-reach locations
        Department stores, supermarkets, warehouses, production halls and public areas like car parks and railway stations
        Architectural lighting and customized solutions
        Economic solutions for high-ceiling lighting in shops, industry and department stores
        Aesthetic pendants and furniture-mounted luminaires in offices, workshops, restaurants and reception areas

        Warning & Safety

        Philips HF Xtreme gear ensures longest lifetime.
        To achieve lifetimes as published for 100% operation, dimming below 30% should not be applied.
        A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
        • Отметнете продукт, за да го добавите
        • Отметнете продукт, за да го добавите
        • Отметнете продукт, за да го добавите
        Отметнете продукт, за да го добавите

        Създаваме нови предимства  заедно

        Намерете най-близкия дистрибутор или партньор

        Изберете предпочитаната от вас страна от долния списък,
        за да намерите най-близкия дистрибутор или партньор.


        Търсене на дистрибутор или партньор

        Карта на света