В момента разглеждате уебсайта на Philips lighting. На Ваше разположение има и локализирана версия.
    Close filters Show filters
    Показване на повече филтри
    Показване на по-малко филтри
    • Продукт
    • Wattage
    • Lamp Luminous Flux
    • CCT (K)
    • IES
    • Изтегли листовката

    Сортиране по:

        Product family information

        ClearWay gen2 enables you to enjoy the benefits of LED technology right from the start. This new second generation of the luminaire builds on the strengths of its predecessor and is designed to further minimize your Total Cost of Ownership. ClearWay gen2 significantly improves the most important aspects of the street lighting experience compared to conventional lighting. Ideal for new streets and for renovating existing installations, this affordable range of lighting solutions combines clean, high quality light with significant energy and maintenance savings. In short, ClearWay gen2 means good quality light with all the added benefits of LED - energy savings and long lifetime. Offering more benefits, yet packaged in a thinner and lighter design, which makes it easier to install.


        All benefits packaged in one single luminaire architecture
        Easy to install
        Low initial cost
        Reasonable Total Cost of Ownership
        Equipped with Service tag, a QR-based identification system that makes each luminaire uniquely identifiable and provides maintenance, installation and spare part information


        One flexible design variant offering different options depending on the needs of the application
        Compact and efficient design
        Tilt regulation without needing to open cover
        ClearWay gen2 is also equipped with a dedicate light recipes that preserves a dark night sky.


        Urban and residential roads
        Bicycle and pedestrian paths
        Minor roads
        Свързани инструменти
        Product family details
        • BGP307
        Light source
        • Integral LED-module
        • 5,9 to 82W (depending on the version)
        Luminous flux
        • Core version from 2 250 to 9 460lm (system)
        • Performer version: from 700 to 10 920lm (system)
        Luminaire efficacy
        • Up to 150 lm/W (depending on the version)
        Correlated Color Temperature
        • Core:
        • Neutral white (NW): 4000 K
        • Performer
        • Warm white (WW): 3000 K
        • Neutral white (NW): 4000 K
        Color Rendering Index
        • NW: 70
        • WW: 80
        Lumen maintenance at median useful life* 100000 h
        • Performer: up to L97
        • Core: min L80
        Control gear failure rate at median useful life 100000 h
        • 10%
        Performance Ambient Temperature Tq
        • +25 ºC
        Operating temperature range
        • -30 to +35ºC (wider range upon request)
        • Built-in (self-ballasted LED-module)
        Mains voltage
        • 220-240 V / 50-60 Hz
        • LightWave CityTouch
        • LineSwitch
        • CodedMains
        • LumiStep
        • DynaDimmer
        • MainsDimming
        • System Ready Interface
        • Nema Socket 5 PIN
        • Nema Socket 7 PIN
        • Constant light output (CLO)
        • External cable 4, 6, 8, 10, 12, 15, 22 m
        • Surge protection device (up to 10 kV)
        • Backlight louver (BL1 and BL2) for some optics
        • Core version: Distribution Medium (DM) or Distribution Wide (DW)
        • Performer version: Distribution Narrow (DN10), Distribution Medium (DM10, DM11, DM12, DM50), Distribution Wide (DW10)
        • Other premium optics for perfomer upon request
        • Housing: die-cast aluminum, high-pressure
        • Cover: glass, thermally hardened, 5 mm
        • Standard light grey, (RAL7035), other colors upon request
        • Screw connection block or cable or as option an external IP connector
        • Opening cover with 2 screws
        • The Philips Service tag will help to identify the product and share all product information on the spot
        • Side entry mounting: Ø 32-48 or 48-60 mm
        • Post-top mounting: Ø 32-48, 48-60 or 76 mm
        • Optional spigot insert (reducer)
        • Recommended mounting height: 4-18 m
        • Standard tilt angle post top: +0 to 15º
        • Standard tilt angle side entry: +15 to -90º
        • Max SCx: 0,0203 m²
        SR compatibility
        • Luminaire prepared for SR drivers and socket, offering a standardized futureproof platform for connectivity and sensors.
        • For SR based luminaires only SR Certified components/sensors are to be used (see also: http://www.lighting.philips.co.uk/oem-emea/products/driving-connected-lighting). Functional compatibility of 2 (SR certified) components/sensors to be used in combination as well as override possibility of any lineswitch function used in a SR based luminaire, is to be released by the master component/sensor supplier. For the use of NEMA 7pin socket on a SR based luminaire a full system verification is required. Not following these advises can/will cause risk of damage and non-compliance for which Signify cannot take any responsibility.
        • Отметнете продукт, за да го добавите
        • Отметнете продукт, за да го добавите
        • Отметнете продукт, за да го добавите
        Отметнете продукт, за да го добавите

        Създаваме нови предимства  заедно

        Намерете най-близкия дистрибутор или партньор

        Изберете предпочитаната от вас страна от долния списък,
        за да намерите най-близкия дистрибутор или партньор.


        Търсене на дистрибутор или партньор

        Карта на света