| Lamp family code | LED64
[ LED module 6400 lm] |
||
| Light source color | 740 neutral white
|
||
| Light source replaceable | Yes
|
||
| Number of gear units | 1 unit
|
||
| Driver/power unit/transformer | PSD
[ Power supply unit with DALI interface] |
||
| Driver included | Yes
|
||
| Optical cover/lens type | FG
[ Flat glass] |
||
| Luminaire light beam spread | 52° - 7° x 151°
|
||
| Control interface | DALI
|
||
| Connection | No
[ -] |
||
| Cable | -
|
||
| Protection class IEC | Safety class I (I)
|
||
| Flammability mark | F
[ For mounting on normally flammable surfaces] |
||
| CE mark | CE mark
|
||
| ENEC mark | ENEC mark
|
||
| Warranty period | 5 years
|
||
| Optic type outdoor | Distribution wide 10
|
||
| Remarks | *-Per Lighting Europe guidance paper “Evaluating performance of LED based luminaires - January 2018”: statistically there is no relevant difference in lumen maintenance between B50 and for example B10. Therefore, the median useful life (B50) value also represents the B10 value.
|
Zhaga-D4i / SR compatibility: Luminaire prepared for D4i / SR drivers and Zhaga Book18 socket, offering a standardized futureproof platform for connectivity and sensors. For Zhaga-D4i / SR based luminaires only Zhaga-D4i / SR Certified components/sensors are to be used (see also: https://www.zhagastandard.org/products / http://www.lighting.philips.co.uk/oem-emea/products/driving-connected-lighting) . Functional compatibility of 2 Zhaga-D4i / SR certified) components/sensors to be used in combination as well as override possibility of any lineswitch function used in a SR based luminaire, is to be released by the master component/sensor supplier. For the use of NEMA 7pin socket on a Zhaga-D4i / SR based luminaire a full system verification is required. Not following these advises can/will cause risk of damage and non-compliance for which Signify cannot take any responsibility.
|
* At extreme ambient temperatures the luminaire might automatically dim down to protect components
|
| Constant light output | No
|
||
| Number of products on MCB of 16 A type B | 10
|
||
| EU RoHS compliant | Yes
|
||
| Light source engine type | LED
|
||
| Serviceability class | Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
|
||
| Product family code | BSP764
[ DigiStreet Suspended] |
| Upward light output ratio | 0
|
| Standard tilt angle posttop | -
|
| Standard tilt angle side entry | -
|
| Input Voltage | 220 to 240
V
|
| Input Frequency | 50 to 60
Hz
|
| Inrush current | 43
A
|
| Inrush time | 0.26
ms
|
| Power Factor (Min) | 0.97
|
| Dimmable | Yes
|
| Housing Material | Aluminum die–cast
|
| Reflector material | -
|
| Optic material | Polycarbonate
|
| Optical cover/lens material | Glass
|
| Fixation material | Aluminum
|
| Mounting device | Frame for recessed mounting
|
| Optical cover/lens shape | Flat
|
| Optical cover/lens finish | Clear
|
| Overall length | 580
mm
|
| Overall width | 530
mm
|
| Overall height | 86.5
mm
|
| Effective projected area | 0.037
m²
|
| Color | Aluminum
|
| Dimensions (Height x Width x Depth) | 87 x 530 x 580 mm (3.4 x 20.9 x 22.8 in)
|
| Ingress protection code | IP66
[ Dust penetration-protected, jet-proof] |
| Mech. impact protection code | IK09
[ 10 J] |
| Surge Protection (Common/Differential) | Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
|
| Initial luminous flux (system flux) | 5888
lm
|
| Luminous flux tolerance | +/-7%
|
| Initial LED luminaire efficacy | 155
lm/W
|
| Init. Corr. Color Temperature | 4000
K
|
| Init. Color Rendering Index | >70
|
| Initial chromaticity | (0.382; 0.380) SDCM < 5
|
| Initial input power | 38
W
|
| Power consumption tolerance | +/-10%
|
| Init. Color Rendering Index Tolerance | +/-2
|
| Control gear failure rate at median useful life 100000 h | 10
%
|
| Lumen maintenance at median useful life* 100000 h | L98
|
| Ambient temperature range | -40 to +50 °C
|
| Performance ambient temperature Tq | 25 °C
|
| Maximum dim level | 10%
|
| Full product code | 871869945022900
|
| Order product name | BSP764 LED64-4S/740 DW10 PSD-SR SRT SRB
|
| EAN/UPC - Product | 8718699450229
|
| Order code | 45022900
|
| Numerator - Quantity Per Pack | 1
|
| Numerator - Packs per outer box | 1
|
| Material Nr. (12NC) | 912300023970
|
| Net Weight (Piece) | 8.800
kg
|
