В момента разглеждате уебсайта на Philips lighting. На Ваше разположение има и локализирана версия.
Предложения
    • Get your city ready for the future with DigiStreet

      BTP764 LED64-4S/740 DSW1 PSD-SR SRT SRB
      LED
      BTP764 LED64-4S/740 DSW1 PSD-SR SRT SRB

      BTP764 LED64-4S/740 DSW1 PSD-SR SRT SRB

      Order code: 45021200

      Full Product Code: 871869945021200

    Specifications Show all

    General Information
    Lamp family code
    LED64  [ LED module 6400 lm]
    Light source color
    740 neutral white
    Light source replaceable
    Yes
    Number of gear units
    1 unit
    Driver/power unit/transformer
    PSD  [ Power supply unit with DALI interface]
    Driver included
    Yes
    Optical cover/lens type
    FG  [ Flat glass]
    Luminaire light beam spread
    -
    Control interface
    DALI
    Connection
    No  [ -]
    Cable
    -
    Protection class IEC
    Safety class I (I)
    Flammability mark
    F  [ For mounting on normally flammable surfaces]
    CE mark
    CE mark
    ENEC mark
    ENEC mark
    Warranty period
    5 years
    Optic type outdoor
    Distribution symmetrical wide 1
    Remarks
    *-Per Lighting Europe guidance paper “Evaluating performance of LED based luminaires - January 2018”: statistically there is no relevant difference in lumen maintenance between B50 and for example B10. Therefore, the median useful life (B50) value also represents the B10 value.
    Zhaga-D4i / SR compatibility: Luminaire prepared for D4i / SR drivers and Zhaga Book18 socket, offering a standardized futureproof platform for connectivity and sensors. For Zhaga-D4i / SR based luminaires only Zhaga-D4i / SR Certified components/sensors are to be used (see also: https://www.zhagastandard.org/products / http://www.lighting.philips.co.uk/oem-emea/products/driving-connected-lighting) . Functional compatibility of 2 Zhaga-D4i / SR certified) components/sensors to be used in combination as well as override possibility of any lineswitch function used in a SR based luminaire, is to be released by the master component/sensor supplier. For the use of NEMA 7pin socket on a Zhaga-D4i / SR based luminaire a full system verification is required. Not following these advises can/will cause risk of damage and non-compliance for which Signify cannot take any responsibility.
    * At extreme ambient temperatures the luminaire might automatically dim down to protect components
    Constant light output
    No
    Number of products on MCB of 16 A type B
    10
    EU RoHS compliant
    Yes
    Light source engine type
    LED
    Serviceability class
    Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
    Product family code
    BTP764  [ DigiStreet Catenary]
    Light Technical
    Upward light output ratio
    0
    Standard tilt angle posttop
    -
    Standard tilt angle side entry
    -
    Operating and Electrical
    Input Voltage
    220 to 240 V
    Input Frequency
    50 to 60 Hz
    Inrush current
    43 A
    Inrush time
    0.26 ms
    Power Factor (Min)
    0.97
    Controls and Dimming
    Dimmable
    Yes
    Mechanical and Housing
    Housing Material
    Aluminum die–cast
    Reflector material
    -
    Optic material
    Polycarbonate
    Optical cover/lens material
    Glass
    Fixation material
    Aluminum
    Mounting device
    CB  [ Catenary bracket]
    Optical cover/lens shape
    Flat
    Optical cover/lens finish
    Clear
    Overall length
    580 mm
    Overall width
    530 mm
    Overall height
    86.5 mm
    Effective projected area
    0.037 m²
    Color
    Aluminum
    Dimensions (Height x Width x Depth)
    87 x 530 x 580 mm (3.4 x 20.9 x 22.8 in)
    Approval and Application
    Ingress protection code
    IP66  [ Dust penetration-protected, jet-proof]
    Mech. impact protection code
    IK09  [ 10 J]
    Surge Protection (Common/Differential)
    Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
    Initial Performance (IEC Compliant)
    Initial luminous flux (system flux)
    5760 lm
    Luminous flux tolerance
    +/-7%
    Initial LED luminaire efficacy
    152 lm/W
    Init. Corr. Color Temperature
    4000 K
    Init. Color Rendering Index
    >70
    Initial chromaticity
    (0.382; 0.380) SDCM < 5
    Initial input power
    38 W
    Power consumption tolerance
    +/-11%
    Over Time Performance (IEC Compliant)
    Control gear failure rate at median useful life 100000 h
    10 %
    Lumen maintenance at median useful life* 100000 h
    L98
    Application Conditions
    Ambient temperature range
    -40 to +50 °C
    Performance ambient temperature Tq
    25 °C
    Maximum dim level
    10%
    Product Data
    Full product code
    871869945021200
    Order product name
    BTP764 LED64-4S/740 DSW1 PSD-SR SRT SRB
    EAN/UPC - Product
    8718699450212
    Order code
    45021200
    Numerator - Quantity Per Pack
    1
    Numerator - Packs per outer box
    1
    Material Nr. (12NC)
    912300023969
    Net Weight (Piece)
    9.700 kg
    Installation Diagrams
     DigiStreet Catenary
    DigiStreet Catenary
    Downloads
    Leaflets
    Visuals
    Brochures

    Recently Viewed

    • Отметнете продукт, за да го добавите
       
    • Отметнете продукт, за да го добавите
       
    • Отметнете продукт, за да го добавите
       
    Отметнете продукт, за да го добавите