марки

    • TownGuide Performer – Designed around your needs

      BDP101 LED60/830 II DS PCF SI CLO-DDF2 6
      LED
      BDP101 LED60/830 II DS PCF SI CLO-DDF2 6

      BDP101 LED60/830 II DS PCF SI CLO-DDF2 6

      Order code: 90614800

      Full Product Code: 871829190614800

    Specifications Show all

    General Information
    Number of light sources
    8  [ 8 pcs]
    Lamp family code
    LED60  [ LED module 6000 lm]
    Light source color
    830 warm white
    Light source replaceable
    Yes
    Number of gear units
    1 unit
    Driver/power unit/transformer
    PSDD-CLO  [ Power supply unit with DynaDimmer and constant light output (integrated)]
    Driver included
    Yes
    Optical cover/lens type
    PCF  [ Polycarbonate bowl/cover frosted]
    Luminaire light beam spread
    75°
    Embedded control
    CLO-DDF2  [ Constant light output and DynaDimmer fixed presets version 2]
    Control interface
    -
    Light regulation
    Dimming via DynaDimmer integrated in ballast or driver
    Connection
    Screw connection block 5-pole
    Cable
    -
    Protection class IEC
    Safety class II (II)
    Parts color
    All parts colored
    Coating
    -
    Glow-wire test
    650/5  [ Temperature 650 °C, duration 5 s]
    Flammability mark
    NO  [ -]
    Safety device
    PCBC  [ PCB cover]
    CE mark
    CE mark
    ENEC mark
    ENEC mark
    Warranty period
    5 years
    Optic type outdoor
    Distribution symmetrical
    Photocell
    No  [ -]
    Constant light output
    Yes
    Number of products on MCB of 16 A type B
    10
    RoHS mark
    RoHS mark
    WEEE mark
    -
    Light source engine type
    LED
    Serviceability class
    Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
    Product family code
    BDP101  [ TOWNGUIDE PERF BOWL]
    Light Technical
    Upward light output ratio
    15
    Standard tilt angle posttop
    Standard tilt angle side entry
    -
    Operating and Electrical
    Input Voltage
    220-240 V
    Input Frequency
    50 to 60 Hz
    Initial CLO power consumption
    44 W
    Average CLO power consumption
    45.5 W
    End CLO power consumption
    46.5 W
    Inrush current
    45 A
    Inrush time
    0.285 ms
    Power Factor (Min)
    0.97
    Power Factor (Nom)
    0.88
    Controls and Dimming
    Dimmable
    Yes
    Mechanical and Housing
    Housing Material
    Aluminum
    Reflector material
    -
    Optic material
    Acrylate
    Optical cover/lens material
    Polycarbonate
    Fixation material
    Steel
    Mounting device
    62P  [ Post-top for diameter 62 mm]
    Optical cover/lens shape
    Hemispherical
    Optical cover/lens finish
    Frosted
    Torque
    15
    Overall height
    293 mm
    Overall diameter
    570 mm
    Effective projected area
    0.095 m²
    Color
    Silver
    Approval and Application
    Ingress protection code
    IP66  [ Dust penetration-protected, jet-proof]
    Mech. impact protection code
    IK10  [ 20 J vandal-resistant]
    Surge Protection (Common/Differential)
    Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
    Initial Performance (IEC Compliant)
    Initial luminous flux (system flux)
    3304 lm
    Luminous flux tolerance
    +/-7%
    Initial LED luminaire efficacy
    75 lm/W
    Init. Corr. Color Temperature
    3000 K
    Init. Color Rendering Index
    80
    Initial chromaticity
    (0.43, 0.40) SDCM <5
    Initial input power
    47 W
    Power consumption tolerance
    +/-11%
    Over Time Performance (IEC Compliant)
    Control gear failure rate at median useful life 100000 h
    0.001 %
    Lumen maintenance at median useful life* 35000 h
    -
    Lumen maintenance at median useful life* 50000 h
    -
    Lumen maintenance at median useful life* 75000 h
    -
    Lumen maintenance at median useful life* 100000 h
    94
    Application Conditions
    Ambient temperature range
    -40 to +35 °C
    Performance ambient temperature Tq
    25 °C
    Maximum dim level
    50%
    Product Data
    Full product code
    871829190614800
    Order product name
    BDP101 LED60/830 II DS PCF SI CLO-DDF2 6
    EAN/UPC - Product
    8718291906148
    Order code
    90614800
    Numerator - Quantity Per Pack
    1
    Numerator - Packs per outer box
    1
    Material Nr. (12NC)
    910500991015
    Net Weight (Piece)
    7.310 kg

    Eco passport - Our environmental product specifications overview

    Philips cares about the environment and society at large, and strongly supports eco-design of products.

    Installation Diagrams
    Photometrics
    OFPL1_BDP101PCF1xGRN60830DS
    OFPL1_BDP101PCF1xGRN60830DS
    Downloads
    Leaflets
    Green Data
    Visuals
    Brochures
    Software Plugins
    • IES OFMT1_BDP101PCF1xGRN60830DS IES 61.7 kB
    • ULD OFDM1_BDP101PCF1xGRN60830DS ULD 51.5 kB
    • Relux OFDM2_BDP101PCF1xGRN60830DS ROLF 45.7 kB
    • LDT OFMT2_BDP101PCF1xGRN60830DS LDT 44.7 kB

    Recently Viewed

    • Отметнете продукт, за да го добавите
       
    • Отметнете продукт, за да го добавите
       
    • Отметнете продукт, за да го добавите
       
    Отметнете продукт, за да го добавите